Bilstein 4600 Front & Rear Shock Kit | 2015-2020 Ford F-150 2WD/4WD | Stock Height
Sale price
$464.00
Regular price $689.40
Skip to product information
Bilstein 4600 Front & Rear Shock Kit | 2015-2020 Ford F-150 2WD/4WD | Stock Height
Sale price
$464.00
Regular price $689.40
Free shipping over $200. Lower 48, no code needed. 30-day returns.
Good to know before you buy
Fits
- 2015-2020 Ford F-150 2WD and 4WD at factory ride height
Does not fit: Raptor, Limited with adaptive dampers, trucks with a leveling kit or lift (use a 5100 kit)
How this kit works
Direct replacement for worn factory shocks with no change in ride height. The 4600 front strut takes your factory coil spring and upper mount, so the front is a strut swap on a spring compressor; the rears bolt in. Bilstein tunes the 4600 for the F-150 specifically, so the truck rides like it did new but with monotube control that does not fade on rough roads or under a load.
- You reuse: factory coil springs, upper strut mounts, isolators and mounting bolts
- You replace: both front strut and damper assemblies, both rear shocks
- You need: a spring compressor (or a shop) for the fronts, and an alignment after install
Why this kit
If the truck floats, nose-dives under braking or wallows with a load and you do not want to change the stance, this is the fix. The 4600 is the OE-height Bilstein: a 46mm monotube with digressive valving that firms up the ride without making it harsh, at a lower price than the adjustable 5100. Four correct part numbers in one order, with a limited lifetime warranty.
At a glance
| Kit contents | 2 front struts + 2 rear shocks (springs not included, factory coils reused) |
|---|---|
| Front | Bilstein 4600 24-337137, stock height |
| Rear | Bilstein 4600 33-253183, stock height |
| Design | Monotube, 46mm piston, zinc plated |
| Drivetrain | 2WD and 4WD |
| Warranty | Limited lifetime (Bilstein North America) |
What is in the box
- 2 x Bilstein 4600 front strut, part number 24-337137
- 2 x Bilstein 4600 rear shock, part number 33-253183
- Hardware and instructions. Factory coil springs, strut mounts and isolators are reused
Questions
Will this level my truck?
No. The 4600 keeps factory ride height. If you want to level the front, use the 5100 leveling kit.
Do I need a spring compressor?
Yes. The factory coil transfers to the new front strut. Plan on 1.5 hours per side for the fronts, 20 minutes per side for the rears, and an alignment afterward.
4600 or 5100?
4600 if you want the factory stance with better control. 5100 if you want the option to level the front now or later; it costs a little more and is adjustable.
What is the warranty?
Limited lifetime warranty on all four dampers through Bilstein North America, processed through the original place of purchase. Keep your Hannah Suspension order confirmation.
About Bilstein
Bilstein has built monotube gas-pressure shocks since 1954 and supplies them as original equipment to Ford, GM, Ram and most European makers. Bilstein of America engineers, tests and builds its truck lines in Hamilton, Ohio and Poway, California. Hannah Suspension ships genuine Bilstein parts with full factory warranty.