Fox 2.0 Performance IFP Front & Rear Shock Kit | 2011-2019 Chevy/GMC 2500HD/3500HD 2WD/4WD | 7-9 in Lift
Good to know before you buy
Fits
- 2011-2019 Chevy Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD, 2WD and 4WD, with a 7 to 9 in lift kit (front 7 to 9 in, rear 7 to 10 in)
Does not fit: trucks lifted 6 in or less (use the 4-6 in kit), stock or leveled trucks
Why this kit
Big-bracket GM HD kits in the 7 to 9 in range push the shock mounts far enough apart that nothing shorter survives full droop. This kit pairs two 980-24-967 fronts rated for 7 to 9 in of front lift with two 980-24-958 rears rated for 7 to 10 in of rear lift, the longest 2.0 Performance Series lengths FOX lists for the truck. Each is a 2 in aluminum-body monotube with an internal floating piston, so the damping holds on long washboard and big hits where a twin-tube fades, with FOX's race-derived high-flow piston and application-specific valving.
At a glance
| Kit contents | 2 front shocks + 2 rear shocks (one complete truck) |
|---|---|
| Front | Fox 2.0 Performance IFP 980-24-967, for 7 to 9 in front lift |
| Rear | Fox 2.0 Performance IFP 980-24-958, for 7 to 10 in rear lift |
| Design | 2.0 in impact-extruded 6061-T6 aluminum body, internal floating piston, 5/8 in hard chrome shaft |
| Drivetrain | 2WD and 4WD |
| Warranty | FOX limited lifetime warranty (Performance Series purchased after 3/30/2025) |
What is in the box
- 2 x Fox 2.0 Performance Series IFP front shock, part number 980-24-967
- 2 x Fox 2.0 Performance Series IFP rear shock, part number 980-24-958
- Bushings, washers and hardware. Lift kit mounting bolts are reused
Questions
My kit is 7.5 in. Front and rear both covered?
Yes. The front covers 7 to 9 in and the rear 7 to 10 in, so any 7, 7.5, 8 or 9 in kit is inside both bands. Rear lift on these kits is usually a little less than the front, which the wider rear band absorbs.
Will the fronts fit my lift kit's shock brackets?
FOX sizes this front to the relocated lower mounts of the common 7-9 in bracket kits. If your kit uses an unusual bracket, compare the extended length before ordering; we can look it up by kit brand.
How long does installation take?
Rears are 20 to 30 minutes per side with hand tools. Fronts are a bolt-in swap at the lift kit's lower mount and the frame, about 30 to 45 minutes per side.
What is the warranty?
FOX covers 2.0 and 2.5 Performance Series IFP shocks purchased after 3/30/2025 with a limited lifetime warranty against defects, to the original retail owner through the original place of purchase. Keep your Hannah Suspension order confirmation.
About FOX
FOX Factory has built racing and off-road dampers since 1974 and supplies factory shocks for the Ford Raptor, Ram TRX and Chevy ZR2. The 2.0 Performance Series brings that race-developed piston and valving to a bolt-on truck shock. Hannah Suspension ships genuine FOX parts with full factory warranty.