Fox 2.5 Performance IFP HTO Front & Rear Shock Kit | 2011-2019 Chevy/GMC 2500HD/3500HD 2WD/4WD | 1.5-2.5 in Lift
Good to know before you buy
Fits
- 2011-2019 Chevy Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD, 2WD and 4WD, with 1.5 to 3.5 in of front lift and 1.5 to 2.5 in of rear lift
Does not fit: stock height trucks, trucks with the rear raised 3 in or more, trucks with a 4 in or taller lift kit (use the 4-6 in kit)
Why this kit
The step up from the Fox 2.0 for a leveled or 2 to 3 in lifted GM HD, without going to a remote reservoir. The 2.5 Performance Series IFP HTO uses a 2.5 in body with a larger piston and much more oil, so it runs cooler and holds its damping longer on a heavy truck than a 2.0 can, while staying a simple bolt-in. Two 987-24-031 fronts for 1.5 to 3.5 in of front lift and two 987-24-011 rears for 1.5 to 2.5 in of rear lift, the pairing FOX lists for a keyed or spacer-leveled front with blocks in the rear. This is the shock for the Duramax that tows every weekend and is going to keep doing it.
At a glance
| Kit contents | 2 front shocks + 2 rear shocks (one complete truck) |
|---|---|
| Front | Fox 2.5 Performance IFP HTO 987-24-031, for 1.5 to 3.5 in front lift |
| Rear | Fox 2.5 Performance IFP HTO 987-24-011, for 1.5 to 2.5 in rear lift |
| Design | 2.5 in aluminum body, internal floating piston, high-temp oil, 7/8 in hard chrome shaft |
| Drivetrain | 2WD and 4WD |
| Warranty | FOX limited lifetime warranty (Performance Series purchased after 3/30/2025) |
What is in the box
- 2 x Fox 2.5 Performance Series IFP HTO front shock, part number 987-24-031
- 2 x Fox 2.5 Performance Series IFP HTO rear shock, part number 987-24-011
- Bushings, washers and hardware. Factory mounting bolts are reused
Questions
2.5 HTO or 2.0 IFP?
Same FOX valving philosophy. The 2.5 has a larger body and piston and roughly 50 percent more oil, so it fades less on long rough roads and under heavy loads. If the truck is a daily driver that occasionally tows, the 2.0 kit is the value pick. If it works hard every week, the 2.5.
Leveled front, stock rear?
Keep this 987-24-031 front and use the 987-24-009 rear (0 to 1 in), sold individually, or ask us and we will pair them for you.
How long does installation take?
Rears are 20 to 30 minutes per side with hand tools. Fronts on the GM independent front suspension bolt to the lower control arm and the frame, about 30 to 45 minutes per side, no spring compressor needed.
What is the warranty?
FOX covers 2.0 and 2.5 Performance Series IFP shocks purchased after 3/30/2025 with a limited lifetime warranty against defects, to the original retail owner through the original place of purchase. Keep your Hannah Suspension order confirmation.
About FOX
FOX Factory has built racing and off-road dampers since 1974 and supplies factory shocks for the Ford Raptor, Ram TRX and Chevy ZR2. The Performance Series brings that race-developed piston and valving to a bolt-on truck shock. Hannah Suspension ships genuine FOX parts with full factory warranty.