Bilstein 6112 Front Coilover + 5160 Rear Reservoir Shock Kit | 2015-2020 Ford F-150 4WD | 0-2 in Front Lift
Sale price
$1,521.00
Regular price $1,604.85
Skip to product information
Bilstein 6112 Front Coilover + 5160 Rear Reservoir Shock Kit | 2015-2020 Ford F-150 4WD | 0-2 in Front Lift
Sale price
$1,521.00
Regular price $1,604.85
Free shipping over $200. Lower 48, no code needed. 30-day returns.
Good to know before you buy
Fits
- 2015-2020 Ford F-150 4WD, stock height through 2 in of front lift, stock to 2 in rear
Does not fit: 2WD trucks, Raptor, Limited with adaptive dampers
How this kit works
The 6112 replaces the entire front strut assembly with a 60mm monotube body, new application-specific coil springs, and an adjustable lower spring seat that sets front height from stock to about 2 in. The 5160 rears are direct replacements with an external reservoir that adds oil volume and heat capacity, so the rear stays consistent on long grades, under a load and on washboard. Kit ships unassembled; the fronts are assembled on a spring compressor and bolted in with your factory upper mounts.
- You reuse: factory upper strut mounts and mounting bolts
- You replace: both front struts and coil springs, both rear shocks
- You need: a spring compressor (or a shop) to assemble the fronts, and an alignment after install
Why this kit
This is the top of the Bilstein ladder for a 2015-2020 F-150 that stays on factory geometry: the 6112 front that forum members call the better all-around choice over the 5100, and the 5160 rear that keeps its damping on heat. It rivals 2.5 in coilover packages that cost far more, uses your factory upper mounts and control arms, and carries a limited lifetime warranty at all four corners. Buy this if you tow, run 33 to 35 in tires, or drive dirt every week.
At a glance
| Kit contents | 2 front 6112 coilovers with new springs and spring seats + 2 rear 5160 remote reservoir shocks |
|---|---|
| Front | Bilstein 6112 kit 47-310995, 60mm monotube, adjustable 0 to 2 in lift, new coil springs included |
| Rear | Bilstein 5160 25-311372, remote reservoir, for stock to 2 in rear lift |
| Design | Front 60mm monotube, rear 46mm monotube with reservoir, digressive valving, zinc plated |
| Drivetrain | 4WD |
| Warranty | Limited lifetime (Bilstein North America) |
What is in the box
- 1 x Bilstein 6112 front coilover kit, part number 47-310995: 2 struts, 2 coil springs, 2 adjustable spring seats, snap rings and hardware
- 2 x Bilstein 5160 rear remote reservoir shock, part number 25-311372, with reservoir mounting brackets
- Factory upper strut mounts are reused. Kit ships unassembled
Questions
Do I get new springs?
Yes. The 6112 includes application-specific coil springs. Your factory coils and any spacer come off the truck.
Does it come assembled?
No. The 6112 ships as strut, spring and seat and needs a spring compressor to assemble. Plan on 2 hours per side for the fronts, 30 to 45 minutes per side for the rears with the reservoir bracket, plus an alignment.
Do I need upper control arms?
Not at the 2 in maximum this kit provides on a 2015-2020 F-150.
What tire size fits?
33 in tires fit at the top setting on factory wheels with minor trimming; 34 to 35 in depends on wheel offset and trimming.
What is the warranty?
Limited lifetime warranty through Bilstein North America, processed through the original place of purchase. Keep your Hannah Suspension order confirmation.
About Bilstein
Bilstein has built monotube gas-pressure shocks since 1954 and supplies them as original equipment to Ford, GM, Ram and most European makers. Bilstein of America engineers, tests and builds its truck lines in Hamilton, Ohio and Poway, California. Hannah Suspension ships genuine Bilstein parts with full factory warranty.