Eibach Pro-Truck Coilover 2.0 Front Coilovers (Pair) | 2015-2020 Ford F-150 4WD | 0-2.3 in Lift | E86-35-035-01-20
Sale price
$995.00
Regular price $1,105.56
Skip to product information
Eibach Pro-Truck Coilover 2.0 Front Coilovers (Pair) | 2015-2020 Ford F-150 4WD | 0-2.3 in Lift | E86-35-035-01-20
Sale price
$995.00
Regular price $1,105.56
Free shipping over $200. Lower 48, no code needed. 30-day returns.
Good to know before you buy
Fits
- 2015-2020 Ford F-150 4WD
Does not fit: Lightning
Eibach's PRO-TRUCK COILOVER 2.0 features threaded bodies for fine-tuning ride height and improved damping performance delivering maximum off-road capability.
- Pre-assembled, factory direct replacement front coilover; no additional parts required; sold in pairs
- Adjustable threaded spring perch to accommodate increased loads and maximum clearance; ERO off-road race spring equipped and compatible
- Anodized 6061-T6 billet aluminum mounts, 46mm piston, monotube design with nitrogen-filled variable force valving
- Individually dyno tested for matched performance and reliability; heavy duty bushing system also cycle tested
- Engineered, tested and manufactured by Eibach in the U.S.A.
Why this front coilovers
A direct replacement for the factory front strut assembly, pre-assembled and ready to bolt in. The threaded perch lets you dial front height to match your rear and your gear.
At a glance
| Series | Pro-Truck Coilover 2.0 |
|---|---|
| Part number | E86-35-035-01-20 |
| Position | Front |
| Lift | 0-2.3 in |
| Drivetrain | 4WD |
| In the box | Two pre-assembled front coilovers with ERO off-road springs; no additional parts required |
| Shock body | 46mm piston monotube, nitrogen charged, zinc-coated body |
| Warranty | Eibach 2 year limited warranty (wear parts such as bushings 1 year) |
| Made in | Corona, California, USA |
| Availability | Distributor stock varies; Eibach factory backorder at time of listing |
Ride height settings
Threaded-body coilover: ride height set by spring perch position. Preload is set to recommended height; additional height will result in less droop travel and harsher ride.
Before you order
- Preload is set to recommended height; additional height will result in less droop travel and harsher ride.
- Alignment required after installation.
- Spanner wrench ETCO2.0 recommended for ride height adjustment.
- Lift height varies by trim and engine per Eibach: 0-2.0 in front; 0-2.2 in front; 0.5-2.3 in front.
- Eibach lists this part for Raptor trims as well; fitment kept as published.
- Eibach lists this part for Tremor trims as well; fitment kept as published.
- Eibach installation instructions: D3850.
Questions
Can I run these with my factory rear shocks?
Yes. Eibach sets the coilover out of the box to sit level with the factory rear. If you add rear lift springs or blocks, add preload to match; Eibach's rear Sport shocks are valved to pair with them.
Do I need an alignment?
Any change in ride height moves camber, caster and toe. Plan on a four-wheel alignment after installation.
What does the warranty cover?
Eibach 2 year limited warranty (wear parts such as bushings 1 year) against defects in material and workmanship, original purchaser, excluding coatings and wear parts. Claims run through the selling dealer with proof of purchase.
Eibach Pro-Truck systems
| System | Components | Height adjustment | Best for |
|---|---|---|---|
| Pro-Truck-Lift Stage 1 | Lift springs + Sport shocks | Clip positions on front shock | Daily driver, level or lift, best value |
| Pro-Truck-Lift Stage 2 | Coilover 2.0 + rear Sport shocks | Threaded perch, infinite | Heavy bumpers, winches, adjustable stance |
| Pro-Truck-Lift Stage 2R | Coilover 2.0 + rear Reservoir shocks | Threaded perch, infinite | Sustained off-road, towing on rough roads |
About Eibach
Eibach has built springs since 1951 and engineers, tests and manufactures its Pro-Truck shocks, coilovers and Pro-Lift-Kit springs in Corona, California. Springs and lift blocks carry a 5 year warranty, dampers and coilovers 2 years, all to the original purchaser.