Fox 2.0 Performance IFP Front & Rear Shock Kit | 2003-2013 Ram 2500/3500 2WD/4WD | 0-2 in Lift
$919.80
Skip to product information
Fox 2.0 Performance IFP Front & Rear Shock Kit | 2003-2013 Ram 2500/3500 2WD/4WD | 0-2 in Lift
$919.80
Free shipping over $200. Lower 48, no code needed. 30-day returns.
Good to know before you buy
Fits
- 2003-2013 Ram 2500/3500 2WD/4WD, leaf-spring rear, at stock height or with up to 2 in of front and rear lift
Does not fit: trucks lifted 2.5 in or more (use the 2-4 in kit), factory air ride
Why this kit
The Fox 2.0 set for a third or fourth generation Cummins that is stock or running a 2 in leveling spacer. Two 980-24-942 fronts sized for 0 to 2 in of front lift and two 980-24-943 rears for 0 to 2 in on the leaf rear, so one kit covers the factory truck and the leveled one. Each is a 2 in aluminum-body monotube with an internal floating piston separating the oil from the nitrogen, so the damping stays consistent with a gooseneck pushing on the frame in summer heat and the truck stops the slow front-end bounce these trucks develop on worn factory shocks. FOX sells them individually; this kit puts the correct four in one order.
At a glance
| Kit contents | 2 front shocks + 2 rear shocks (one complete truck) |
|---|---|
| Front | Fox 2.0 Performance IFP 980-24-942, for 0 to 2 in front lift |
| Rear | Fox 2.0 Performance IFP 980-24-943, for 0 to 2 in rear lift, leaf rear |
| Design | 2.0 in impact-extruded 6061-T6 aluminum body, internal floating piston, 5/8 in hard chrome shaft |
| Drivetrain | 2WD and 4WD |
| Warranty | FOX limited lifetime warranty (Performance Series purchased after 3/30/2025) |
What is in the box
- 2 x Fox 2.0 Performance Series IFP front shock, part number 980-24-942
- 2 x Fox 2.0 Performance Series IFP rear shock, part number 980-24-943
- Bushings, washers and hardware. Factory mounting bolts are reused
Questions
Does this fit my 2005 Power Wagon?
Yes. FOX lists these part numbers for the Power Wagon as well as the standard 2500/3500 at stock height or up to 2 in of lift.
What about a 1994-2002 Ram 2500/3500?
FOX lists both shocks for the second generation trucks too. We tag the kit for 2003-2013 because that is where the fitment is cleanest; if you have an earlier truck, check the individual part number listings for your year.
How long does installation take?
Rears are 20 to 30 minutes per side. Fronts on the Ram solid axle are a bolt-in shock, about 30 to 45 minutes per side, no spring compressor needed.
What is the warranty?
FOX covers 2.0 and 2.5 Performance Series IFP shocks purchased after 3/30/2025 with a limited lifetime warranty against defects, to the original retail owner through the original place of purchase. Keep your Hannah Suspension order confirmation.
About FOX
FOX Factory has built racing and off-road dampers since 1974 and supplies factory shocks for the Ford Raptor, Ram TRX and Chevy ZR2. The 2.0 Performance Series brings that race-developed piston and valving to a bolt-on truck shock. Hannah Suspension ships genuine FOX parts with full factory warranty.