Fox 2.0 Performance IFP Front & Rear Shock Kit | 2005-2016 Ford F-250/F-350 Super Duty 2WD/4WD | Stock Height
Shocks only
$919.80
Skip to product information
Fox 2.0 Performance IFP Front & Rear Shock Kit | 2005-2016 Ford F-250/F-350 Super Duty 2WD/4WD | Stock Height
$919.80
Free shipping over $200. Lower 48, no code needed. 30-day returns.
Good to know before you buy
Fits
- 2005-2016 Ford F-250/F-350 Super Duty 2WD/4WD at stock height or with up to 1.5 in front and 1 in rear lift
Does not fit: Factory lift packages, trucks leveled 2 in or more (use the Front Leveling Lift kit), 2017 and newer trucks
Why this kit
FOX sells its 2.0 Performance Series shocks one at a time, so a full set means picking four part numbers by lift band. This kit is the stock-height set for the 2005-2016 Super Duty: two 980-24-677 fronts for 0 to 1.5 in of front lift and two 980-24-647 rears for 0 to 1 in of rear lift. Each is a 2 in aluminum-body monotube with an internal floating piston separating the oil from the nitrogen, so the damping stays consistent when hot and there is no foaming on long washboard or with a trailer working the rear. Firmer and more planted than the worn factory shocks these trucks are usually still wearing.
At a glance
| Kit contents | 2 front shocks + 2 rear shocks (one complete truck) |
|---|---|
| Front | Fox 2.0 Performance IFP 980-24-677, for 0 to 1.5 in front lift |
| Rear | Fox 2.0 Performance IFP 980-24-647, for 0 to 1 in rear lift |
| Design | 2.0 in impact-extruded 6061-T6 aluminum body, internal floating piston, 5/8 in hard chrome shaft |
| Drivetrain | 2WD and 4WD |
| Steering stabilizer option | Add one Fox 2.0 Performance IFP steering stabilizer 985-24-001 (2008-2016 trucks) with the selector above |
| Warranty | FOX limited lifetime warranty (Performance Series purchased after 3/30/2025) |
What is in the box
- 2 x Fox 2.0 Performance Series IFP front shock, part number 980-24-677
- 2 x Fox 2.0 Performance Series IFP rear shock, part number 980-24-647
- Optional: 1 x Fox 2.0 Performance Series IFP steering stabilizer, part number 985-24-001, when selected
- Bushings, washers and hardware. Factory mounting bolts are reused
Questions
Fox 2.0 or Bilstein 4600 for a stock Super Duty?
Both are direct fits. The Bilstein is the OE-plus choice with a slightly softer highway ride. The Fox 2.0 is firmer, more controlled off pavement and under load, and is the shock most owners pick when the truck sees dirt roads or a heavy trailer regularly.
My truck has a 2 in leveling kit. Is this the right set?
No. Use the 2-3.5 in Front Leveling Lift kit, which pairs the longer 980-24-646 front with the same 980-24-647 rear.
Should I add the steering stabilizer?
If the truck wanders on the highway, follows ruts, or twitches on bigger tires, yes. The 985-24-001 is a 2.0 IFP damper on the drag link that bolts to the factory stabilizer mounts in about 20 minutes and fits 2008-2016 Super Duty. Pick "Shocks + steering stabilizer" above to add one. 2005-2007 trucks use a different damper; choose "Shocks only."
How long does installation take?
Rears are 20 to 30 minutes per side with hand tools. Fronts on the solid axle are a bolt-in shock, about 30 to 45 minutes per side, no spring compressor needed.
What is the warranty?
FOX covers 2.0 and 2.5 Performance Series IFP shocks purchased after 3/30/2025 with a limited lifetime warranty against defects, to the original retail owner through the original place of purchase. Keep your Hannah Suspension order confirmation.
About FOX
FOX Factory has built racing and off-road dampers since 1974 and supplies factory shocks for the Ford Raptor, Ram TRX and Chevy ZR2. The 2.0 Performance Series brings that race-developed piston and valving to a bolt-on truck shock. Hannah Suspension ships genuine FOX parts with full factory warranty.