Bilstein 5100 Front & Rear Shock Kit | 2017-2026 Ford F-250/F-350 Super Duty 4WD | 2-2.5 in Front Lift
Sale price
$492.00
Regular price $687.40
Skip to product information
Bilstein 5100 Front & Rear Shock Kit | 2017-2026 Ford F-250/F-350 Super Duty 4WD | 2-2.5 in Front Lift
Sale price
$492.00
Regular price $687.40
Free shipping over $200. Lower 48, no code needed. 30-day returns.
Good to know before you buy
Fits
- 2017-2026 Ford F-250/F-350 Super Duty 4WD with 2 to 2.5 in front leveling lift and 0 to 1 in rear lift
Does not fit: Tremor, factory lift packages, stock height trucks (use the Bilstein 4600 Front & Rear Kit instead)
Why this kit
This is the four-shock Bilstein 5100 set that leveled Super Duty owners piece together one part number at a time. Hannah Suspension pairs the correct 2 to 2.5 in front shock (24-274951) with the correct 0 to 1 in rear shock (24-274968) so the truck gets matched digressive valving at all four corners in one order. Both are 46mm monotube shocks tuned for the extra ride height and larger tires that come with a leveling kit, and both carry Bilstein's limited lifetime warranty.
At a glance
| Kit contents | 2 front shocks + 2 rear shocks (one complete truck) |
|---|---|
| Front | Bilstein 5100 24-274951, for 2 to 2.5 in front lift |
| Rear | Bilstein 5100 24-274968, for 0 to 1 in rear lift |
| Design | Monotube, 46mm piston, zinc plated |
| Valving | Velocity-sensitive digressive, tuned per position |
| Drivetrain | 4WD |
| Warranty | Limited lifetime (Bilstein North America) |
What is in the box
- 2 x Bilstein 5100 front shock, part number 24-274951
- 2 x Bilstein 5100 rear shock, part number 24-274968
- Mounting hardware as required for this application and instructions
Questions
My Super Duty is stock height. Is this the right kit?
No. The 24-274951 front is built for a truck sitting 2 to 2.5 in higher than stock in the front, typically from a leveling kit. On a stock truck it will limit compression travel. Use the Bilstein 4600 Front & Rear Kit for stock height.
Do I need a steering stabilizer too?
Not required, but the factory damper is usually tired by the time the shocks are. Hannah Suspension offers this same kit with the matching Bilstein 5100 steering damper (24-286558) added.
Does this fit the Tremor package?
No. Tremor trucks sit higher from the factory and use different rear blocks. This kit is for non-Tremor F-250/F-350 with an aftermarket 2 to 2.5 in front level.
How long does installation take?
Rears are 20 to 30 minutes per side with hand tools. Fronts on the Super Duty solid axle are a bolt-in shock, no spring compressor needed, about 30 to 45 minutes per side.
What is the warranty?
Limited lifetime warranty on all four shocks through Bilstein North America. Warranties are processed through the original place of purchase, so keep your Hannah Suspension order confirmation.
About Bilstein
Bilstein has built monotube gas-pressure shocks since 1954 and supplies them as original equipment to Ford, GM, Ram and most European makers. Bilstein of America engineers, tests and builds its truck lines in Hamilton, Ohio and Poway, California. Hannah Suspension ships genuine Bilstein parts with full factory warranty.