Fox 2.0 Performance IFP Front & Rear Shock Kit | 2017-2026 Ford F-250/F-350 Super Duty 4WD | 2-3.5 in Lift
Good to know before you buy
Fits
- 2017-2026 Ford F-250/F-350 Super Duty 4WD with 2 to 3.5 in of front lift and 1.5 to 3.5 in of rear lift
Does not fit: 2WD trucks, stock height trucks, leveled trucks with a stock rear (use the Front Leveling Lift kit), trucks lifted 4 in or more
Why this kit
For a Super Duty running a 2.5 or 3 in lift kit with rear blocks or add-a-leafs, both ends need a longer shock. This kit pairs two 985-24-155 fronts for 2 to 3.5 in of front lift with two 985-24-152 rears for 1.5 to 3.5 in of rear lift, the same combination ShockWarehouse and FOX list as the 2-3.5 in lift set. Each is a 2 in aluminum-body monotube with an internal floating piston, so the damping stays consistent when hot and the truck keeps full travel at the new ride height instead of topping out the factory-length shocks.
At a glance
| Kit contents | 2 front shocks + 2 rear shocks (one complete truck) |
|---|---|
| Front | Fox 2.0 Performance IFP 985-24-155, for 2 to 3.5 in front lift |
| Rear | Fox 2.0 Performance IFP 985-24-152, for 1.5 to 3.5 in rear lift |
| Design | 2.0 in impact-extruded 6061-T6 aluminum body, internal floating piston, 5/8 in hard chrome shaft |
| Drivetrain | 4WD |
| Steering stabilizer option | Add one Fox 2.0 Performance IFP steering stabilizer 985-24-001 with the selector above |
| Warranty | FOX limited lifetime warranty (Performance Series purchased after 3/30/2025) |
What is in the box
- 2 x Fox 2.0 Performance Series IFP front shock, part number 985-24-155
- 2 x Fox 2.0 Performance Series IFP rear shock, part number 985-24-152
- Optional: 1 x Fox 2.0 Performance Series IFP steering stabilizer, part number 985-24-001, when selected
- Bushings, washers and hardware. Factory mounting bolts are reused
Questions
Leveling kit or lift kit, which Fox set do I need?
If only the front was raised, use the Front Leveling Lift kit with the 985-24-151 stock-length rear. If the rear was raised 1.5 in or more with blocks or springs, this kit with the 985-24-152 rear is correct.
Should I add the steering stabilizer?
If the truck wanders on the highway, follows ruts, or twitches on 35s, yes. The 985-24-001 is a 2.0 IFP damper on the drag link that bolts to the factory stabilizer mounts in about 20 minutes and fits every 2017-2026 F-250 and F-350. Pick "Shocks + steering stabilizer" above to add one to the order.
Does this fit a 2WD Super Duty?
No. The 985-24-155 front is 4WD only. FOX lists separate 2WD fronts, sold individually.
How long does installation take?
Rears are 20 to 30 minutes per side. Fronts on the solid axle are a bolt-in shock, about 30 to 45 minutes per side, no spring compressor needed.
What is the warranty?
FOX covers 2.0 and 2.5 Performance Series IFP shocks purchased after 3/30/2025 with a limited lifetime warranty against defects, to the original retail owner through the original place of purchase. Keep your Hannah Suspension order confirmation.
About FOX
FOX Factory has built racing and off-road dampers since 1974 and supplies factory shocks for the Ford Raptor, Ram TRX and Chevy ZR2. The 2.0 Performance Series brings that race-developed piston and valving to a bolt-on truck shock. Hannah Suspension ships genuine FOX parts with full factory warranty.